Laser Cleaning Machine

1.Instruction:

Laser cleaning machine is a new generation of high-tech equipment for surface cleaning.Easy to install, operate and automate. The operation is simple, the power is turned on, andthe equipment is turned on to perform cleaning without chemicals, media, dust, and water.It can automatically focus, clean with curved surfaces, and has the advantages of high cleanliness. It can remove resin, Grease, stains, dirt, rust, coating, plating, paint. No damage to the part matrix, no consumables, energy saving and environmental protection, achieving higher cleanliness cleaning effect and lower overall cost production benefits.

Configuration

Mode of operation:Handheld/Automated Air cooling system
Scanning range (length * width) Single axis:5mm~120mm
Scanning frequency 10Hz~300Hz
Field lens focal length (mm) 160mm (optional 100mm~500mm)
Depth of focus max 15mm
Size 800mm×650mm×370mm(0.2 立方)
Weight 56kg
Weight of cleaning head (including isolator) about 2Kg
Power supply voltage Single phase 220V±10%, 50/60Hz AC
laser cleaning machine

2.Parameter:

Power: 100W
Laser Type: Pulse Fiber Laser Generator
Wavelength 1064nm
Maximum Marking Line 150mm
Gross Power 0.5kwH
Warranty 2 Year
Pulse energy 1.5mJ
Peak power 15kW
Head Weight Standard head:1.8kg, Anti-shake head:2.0kg
Scan width 5mm-120mm (Customized)Continuously Adjustable
Cooling Air Cooling
Cleaning paint/rust 8.0m2/h
Cleaning oil 9.0m2/h
Titanium alloy/stainless Steel oxide 8.0m2/h
Cleaning aluminum alloy oxide film 6.0m2/h
laser cleaning machine-uscam
Laser Rust removal machine in UAE

3. Product features

1). Laser Cleaning control

Using a cleaning control system developed by ourselves for many years, the cleaning card is designed with a physical chip, and the embedded touch control system is the latest dual-core high-speed and added anti-surge and power-off backup functions. It has been highly evaluated in the current market. The overall performance is smooth operation, stable performance, and its efficiency and functions are almost the same as those of international
mainstream equipment.

2). Full machine self-made rate

Except that the laser uses a well-known manufacturer, the connector and power supply are all certified by safety regulations. The other control systems, galvanometers, and the whole machine are all produced by themselves to ensure the highest quality of the whole machine. Each machine can reach more than 65% of self-made rate.

4.Application cases

1). Carbon steel plate derusting

Sample: Carbon steel plate
Material: carbon structural steel
Cleaning efficiency: 400mm2/s
Cleaning effect: the rust layer is removed cleanly without residue, and the surface is not damaged

2). Paint removal of sheet metal parts

Sample: Sheet metal parts
Material: carbon steel (with no bottom paint)
Cleaning efficiency: 900mm2/s
Cleaning effect: the paint layer is removed cleanly without residue, and the substrate is not damaged

3). Rust removal of sheet metal parts

Sample: Sheet metal parts
Material: carbon steel
Cleaning efficiency: 900mm2/s

4). Alumina board renovation

Sample: Aluminum alloy
Material: 6063
Cleaning efficiency: 900mm2/s
Cleaning effect: the paint layer is removed cleanly without residue, and the substrate is not damaged